Fiery 750DP - Phaser Color Laser Printer Administration Manual page 23

1
1-12 Connecting to the Network
Centronics-type parallel connector
AUI connector for thinnet and thicknet
RJ-45 connector for twisted pair Ethernet
Serial port for densitometer (for
calibration)
SCSI connector for external CD-ROM drive
! !
T
O USE THINNET CABLE
1. With the Fiery SI turned off, connect the transceiver to the AUI connector on the back
2. Connect the thinnet cable to the BNC connector on the transceiver.
3. Configure network servers for printing and then proceed to Setup.
Back view of the Fiery SI
Shut down the Fiery SI before connecting it to any network device
Do not attach the cable to more than one Ethernet connector on the Fiery SI at
N :
OTE
one time.
:
of the Fiery SI. Press down on the latch to lock the transceiver connection.
Copier connector slot
Slots for options, for example
token ring
Power switch
.