Fiery 750DP - Phaser Color Laser Printer Administration Manual page 38

2
2-14 Setting up the Fiery SI
Exit IPX Setup
Add File Server
View Server List
Edit Connection
IPX (Novell) Setup
Remove File Server
IPX (Novell) Setup
Select Frame Type
Ethernet 802.3/Ethernet 802.2/Ethernet II
Select the frame type used between the NetWare server(s) and the Fiery SI. Only one
frame type can be used.
If the IPX/SPX network does not include a NetWare server, select the frame type that
is used on the workstation or workstations that will connect to the Fiery SI. For those
networks press OK after selecting the frame type, and then press the menu button,
since the remaining IPX (Novell) Setup options do not apply.
IPX (Novell) Setup menu
Because you can set up more than one Novell server to handle Fiery SI print jobs, an
additional menu is displayed for this purpose. The options are:
• Add File Server— creates a new file server connection to the Fiery SI. You can set up
as many as eight file server connections to handle Fiery SI print jobs over Ethernet,
and eight over token ring. (It's possible for both Ethernet and token ring hardware
to be active on the same file server.) After you have finished adding a new server, you
return to the IPX (Novell) Setup menu, and you can set up another if you wish.
Remember that after adding a file server, you have to finish setup in Printer Setup
(see page 2-26).
• View Server List— displays the list of file servers that have already been selected to
communicate with the Fiery SI.
• —lets you change the NetWare Print Server that will print to the
Edit Connection
Fiery SI, and change the poll interval.
• —lets you disconnect the Fiery SI from a file server to which it is
Remove File Server
currently connected. Remove a file server when you want to reduce the number of
connections to the Fiery SI or re-assign the connection to a different NetWare file
server.
• —after you have viewed a list of file servers or removed a file server
Exit IPX Setup
from the list.
If you change your mind about any of the menus you have selected, you can use
N :
OTE
the Menu button to escape and return to the main IPX (Novell) Setup menu.