Fiery 750DP - Phaser Color Laser Printer Administration Manual page 79

3
3-19 Configuring a Windows NT server to support the Fiery SI
T TCP/IP
O ADD NETWORK SERVICES
1. Log in to the Windows NT server as Administrator.
2. In the Control Panel, double-click the Network icon.
The Network Settings dialog box appears.
3. Click Add Software.
4. In the Add Network Software dialog box, select TCP/IP Protocols and Related Compo-
nents, and click Continue.
5. In the Installation dialog box, be sure to check TCP/IP Network Printing Support.
This supplies the necessary
your system.
6. Configure the Windows NT server with its own IP address, subnet mask, and default
gateway, and a way to communicate with other devices on the TCP/IP network.
For Windows NT configuration options you can use with various host name systems,
see your online or printed Windows NT documentation.
7. When you are finished configuring TCP/IP choose Close and restart your computer for
the changes to take effect.
8. Add the Fiery SI to the network (see the next section).
:
protocol. If the item is grayed, it is already installed on
lpr