Change Password - Fiery 750DP - Phaser Color Laser Printer Administration Manual

2
2-35 Network Setup options
Exit Calibration
When you choose

Change Password

Change Password
password determines whether a user can modify the Setup options, and whether a user
has system administrator control over jobs in the Fiery XJ Spooler queues.
Macintosh, Windows 95, and Windows NT users can move, delete, and configure
their own print jobs; the Fiery SI system administrator (or anyone with Fiery XJ
Spooler password access) can move, delete, and configure jobs for all users, and can re-
order jobs within a queue.On AppleTalk networks, Windows 3.x users who do not
have the password can do everything but re-order jobs within a queue.
When the Fiery SI is installed, there is no password. If you do not create a password,
users are not required to enter a password to modify the Setup or use the administrator
functions in the Fiery XJ Spooler.
If a password has been set previously, you are required to enter it right after Start Up,
when you choose
and the left and right arrows to move between them (see page 2-6).
Scroll the main setup menu to choose
Enter and confirm the password as described below.
New Password
Use the up and down arrow keys to select the characters and the left and right arrows
to move between them. Enter characters from left to right, since the left arrow line
selection key is a delete key. The password can be any combination of letters and num-
bers up to 19 characters. Choose
password. The only way to remove a password that you can't remember is to re-install
controller software.
Verify New Password
Enter the new password again exactly as before to verify that you have entered it cor-
rectly. If you make a mistake, you are prompted to enter the password again. The new
password is effective until you change it again.
, the Fiery SI reboots.
Exit Calibration
enables you to set or change the password for the Fiery SI. The
. Use the up and down arrow keys to select the characters
Run Setup
Change Password
when you are done. Be sure to write down the
OK
.