Important Note About The Remote Printer Name - Fiery 750DP - Phaser Color Laser Printer Administration Manual

3
3-29 Tips for experts—UNIX workstations

Important note about the remote printer name

Whichever UNIX system you use, the name used for remote printer (or
/etc/printcap
the Fiery SI requires. It is not a user-selectable name. Do not enter it elsewhere unless
instructed to do so. This is not the same as the published name or host name.
The remote printer or
number code. The code for your device is listed in the UNIX section of the User Guide.
For future use, enter it here:
The remote printer or
queue_devicename
—must be print or hold.
queue
—the required name or number code for the copier/printer model. This
devicename
name can be found in the section on editing NET_WSCK.INI in Getting Started.
The remote printer or
• When setting up your Windows NT Workstation or server to connect to the
Fiery SI over TCP/IP
Enter the remote printer name when you set up your Windows NT printer, as the
"Name of printer on that (lpr host) machine" in the Add LPR compatible printer
dialog box (see Getting Started).
The device name for your copier/printer model is also used:
• When editing the NET_WSCK.INI file for Windows NT workstations on TCP/IP
networks (see page 3-26 of this manual).
file) in configuring the Fiery SI includes a hard-coded internal name that
name is a composite name that includes a device name or
rp
rp name is:
rp name is also used:
in the
rp