Figure 51: Reinstalling A Power Supply - Juniper T640 Hardware Manual

Related
Documentation
Copyright © 2010, Juniper Networks, Inc.
Tighten the captive screws at the lower corners of the power supply faceplate to
6.
secure the power supply in the chassis.
Repeat the procedure for the upper power supply.
7.

Figure 51: Reinstalling a Power Supply

T640 Preventing Electrostatic Discharge Damage on page 306
T640 Router Installation Summary on page 69
Safety Requirements, Warnings, and Guidelines for Installing the T640 Router on
page 85
T640 Chassis Lifting Guidelines on page 310
Chapter 9: Installing the T640 Router Using a Mechanical Lift
93