Figure 44: Positioning The Spacer Bar On The Rack - Juniper T640 Hardware Manual

T640 Core Router Hardware Guide
80
the center of the rack. The bottom of the small shelf on the rear rack rails must align
with the bottom of the large shelf on the front rack rails.
Partially insert screws into the open holes in the ears of the small shelf.
12.
Tighten all the screws completely.
13.
Remove the mounting brackets from the chassis by loosening the screws at the top
14.
and bottom of each bracket.

Figure 44: Positioning the Spacer Bar on the Rack

Copyright © 2010, Juniper Networks, Inc.