Juniper T640 Hardware Manual page 51

Table 4: Identifying the FPCs Supported by the T640 Router (continued)
FPC
FPC3
Enhanced FPC3
Enhanced II FPC3
Enhanced Scaling FPC3
T640 Enhanced Scaling FPC4
T640 Enhanced Scaling
FPC4-1P
Copyright © 2010, Juniper Networks, Inc.
Label on the FPC Faceplate
None
E FPC3
E-11 FPC3
T640-FPC3-ES
FPC4
T640-FPC4–1P-ES
Chapter 3: T640 Router Hardware Component Overview
Location of PIC Offline
Button
Inside an opening directly on
the faceplate of each PIC
Inside an opening directly on
the faceplate of each PIC
Inside an opening directly on
the faceplate of each PIC
Inside an opening directly on
the faceplate of each PIC
Inside an opening directly on
the faceplate of each PIC
Inside an opening directly on
the faceplate of each PIC
Method of Securing the PIC
to the FPC
Plastic ejector handle at the
top of the PIC faceplate;
captive screw at the bottom
of the PIC faceplate
Two plastic ejector handles
at the top and bottom of the
PIC faceplate
Two plastic ejector handles
at the top and bottom of the
PIC faceplate
Two plastic ejector handles
at the top and bottom of the
PIC faceplate
Two plastic ejector handles
at the top and bottom of the
PIC faceplate
Two plastic ejector handles
at the top and bottom of the
PIC faceplate
21