Juniper T640 Hardware Manual page 206

T640 Core Router Hardware Guide
Related
Documentation
176
Table 32: Tools and Parts Required for Component
Replacement (continued)
Components
DC power supply cable
Fan tray (front or rear)
FPC
PIC
Routing Engine
Serial cable to or
AUXILIARY
Engine port
SIB
or T640-SIB
SCG
T-CB
T640 Chassis Description on page 13
T640 Return Procedure on page 377
Contacting Customer Support on page 377
Tool or Part
7/16-in. (11 mm) nut driver
Wire cutters
Phillips (+) screwdrivers, numbers 1 and 2
Phillips (+) screwdrivers, numbers 1 and 2
Blank panel (if component is not reinstalled)
Electrostatic bag or antistatic mat
Phillips (+) screwdrivers, numbers 1 and 2
Rubber safety cap for fiber-optic PICs or
fiber-optic PIC cables
Flat-blade (–) screwdriver for Type 1 PICs
Electrostatic bag or antistatic mat
Blank panel (if component is not reinstalled)
Phillips (+) screwdrivers, numbers 1 and 2
Electrostatic bag or antistatic mat
Blank panel (if component is not reinstalled)
Routing Flat-blade (–) screwdriver
CONSOLE
Phillips (+) screwdrivers, numbers 1 and 2
Electrostatic bag or antistatic mat
Blank panel (if component is not reinstalled)
Phillips (+) screwdrivers, numbers 1 and 2
Phillips (+) screwdrivers, numbers 1 and 2
Electrostatic bag or antistatic mat
Blank panel (if component is not reinstalled)
Copyright © 2010, Juniper Networks, Inc.