Wireless Mac Filtering - SMC Networks BARRICADE N SMCWBR14SN5V2 User Manual

■
Be sure to click the Save button to save your settings on this page.
Choose Wireless -> MAC Filtering from the menu; you can then control
W MAC
IRELESS
wireless access by configuring the Wireless MAC Address Filtering function,
F
ILTERING
as shown in
Figure 51: Wireless MAC Address Filtering
To filter wireless users by MAC Address, click Enable. The default setting is
Disable.
MAC Address - The wireless station's MAC address that you want to
◆
filter.
Status - The status of this entry, either Enabled or Disabled.
◆
◆ Description - A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the "Add New" button.
The "Add or Modify Wireless MAC Address Filtering entry" page will appear,
as shown in
Group Key Update Period - Specify the group key update interval
in seconds. The value should be 30 or above. Enter 0 to disable the
update.
Figure 51.
Figure 52:
– 68 –
| Configuring the Router
C 4
HAPTER
Wireless