Configuring Client Tcp/Ip; Windows 95/98/Me; Configure Tcp/Ip Settings - SMC Networks Barricade SMC7401BRA User Manual

C
ONFIGURING

Windows 95/98/Me

You may find that the instructions in this chapter do not exactly match
your version of Windows. This is because these steps and screenshots were
created from Windows 98. Windows 95 and Windows Millennium Edition
are similar, but not identical, to Windows 98.

Configure TCP/IP Settings

After completing hardware setup by connecting all your network devices,
you need to configure your computer to connect to the Barricade. First
determine how your ISP issues your IP address. Many ISPs issue these
numbers automatically using Dynamic Host Configuration Protocol
(DHCP). Other ISPs provide a static IP address and associated numbers,
which you must enter manually. How your ISP assigns your IP address
determines how you need to configure your computer.
Follow these instructions:
1. From the Windows desktop, click the
"Start" button. Choose "Settings," and
then click "Control Panel."
C
C
LIENT
HAPTER
TCP/IP
4
4-1