Table 4-2 Configuration Command Modes - SMC Networks SMC TigerStack III SMC6824M Management Manual

To enter the other modes, at the configuration prompt type one of the
following commands. Use the exit or end command to return to the
Privileged Exec mode.

Table 4-2 Configuration Command Modes

Mode Command
Line line {console | vty}
Access access-list ip standard
Control access-list ip extended
List access-list ip mask-precedence
access-list mac
access-list mac mask-precedence
Interface interface {ethernet port |
port-channel id| vlan id}
VLAN vlan database
MSTP spanning-tree mst-configuration Console(config-mstp)#
For example, you can use the following commands to enter interface
configuration mode, and then return to Privileged Exec mode.
Console(config)#interface ethernet 1/5
. .
.
Console(config-if)#exit
Console(config)#
C
OMMAND
Prompt
Console(config-line)#
Console(config-std-acl)
Console(config-ext-acl)
Console(config-ip-mask-acl)
Console(config-mac-acl)
Console(config-mac-mask-acl)
Console(config-if)#
Console(config-vlan)
L I
INE NTERFACE
Page
4-13
4-119
4-170
4-230
4-214
4-9