Routing Table - SMC Networks SMC7904WBRA-N User Manual

C
ONFIGURING THE

Routing Table

Parameter
Flags
Network
Address
Netmask
Gateway
Interface
Metric
4-52
B
ARRICADE
Description
Indicates the route status:
C = Direct connection on the same subnet.
S = Static route.
R = RIP (Routing Information Protocol) assigned route.
I = ICMP (Internet Control Message Protocol) Redirect route.
Destination IP address.
The subnetwork associated with the destination.
This is a template that identifies the address bits in the destination
address used for routing to specific subnets. Each bit that
corresponds to a "1" is part of the subnet mask number; each bit
that corresponds to "0" is part of the host number.
The IP address of the router at the next hop to which frames are
forwarded.
The local interface through which the next hop of this route is
reached.
When a router receives a routing update that contains a new or
changed destination network entry, the router adds 1 to the metric
value indicated in the update and enters the network in the routing
table.