Step 2: Configuring Tcp/Ip Settings - SMC Networks 2585W-G User Manual

2.4.3. Step 2: Configuring TCP/IP Settings

Fig. 8. TCP/IP settings.
Go to the TCP/IP Addressing section to configure IP address settings. The IP address can
be manually set or automatically assigned by a DHCP server on the LAN (Default: DHCP
client enabled). If you are manually setting the IP address, Subnet mask, and Default
gateway settings, set them appropriately, so that they comply with your LAN environment. In
addition, you can specify the Host name and Domain (DNS suffix) of the SMC2585W-G.
When you are finished, click Save at the bottom of this page, and then you are brought back
to the start page.
Step 3: Configuring IEEE 802.11 Settings
Fig. 9. IEEE 802.11g communication settings.
Go to the IEEE 802.11, Communication section to configure IEEE 802.11g-related commu-
nication settings, including Channel number and Network name (SSID).
The number of available RF channels depends on local regulations.
11