Table of Contents
Advertisement
2-3
Uploading Network Configurations and Checking for Communications Unit Errors
Note
DeviceNet Network Upload Resume Function.
If the DeviceNet network configuration is being uploaded with the CX-Integrator version
2.1 or higher, and the upload is cancelled or fails, that network configuration upload
can be restarted to upload the configuration only for the nodes where the upload failed.
Note
Combining PLCs
If different networks are uploaded when connected to different PLCs, a single PLC can
sometimes be registered as different PLCs in the Network Configuration Windows.
If this happens, the Combine two PLCs menu item can be used to combine the two
PLCs into the same PLC.
Example
1. Upload network N1 (Ethernet) while connected to PLC1.
2. Upload network N2 (Controller Link) while connected to PLC2.
3. The same PLC is registered as both PLC3 and PLC4 in the Network Configuration
Windows.
2-3-2
Data is transferred only for
the
nodes
where
the
transfer ended in "Failure"
previously.
Procedure
2-27
Advertisement
Table of Contents
