Table of Contents
Advertisement
1-6
Menus
1-6-1
Menus
Main
Sub-menu/command
menu
View
Zoom
Properties
Insert
Network
Component
Insert TBranch
Network
Work Online
Communication Settings
IP address table setting
Auto Online
Change connection to this PLC
Transfer [PC to Network]
Transfer [Network to PC]
Compare
1-50
200%
Displays components in the
Network Configuration Window at
200% of the default size.
100%
Displays components in the
Network Configuration Window at
the default size.
75%
Displays components in the
Network Configuration Window at
75% of the default size.
50%
Displays components in the
Network Configuration Window at
50% of the default size.
Displays the properties of the
selected project, network,
component, or EDS file.
Adds a new virtual network to the
Network Configuration Window
offline.
Adds the component selected in
the Component List Window to the
Network Configuration Window
offline.
Adds a new T-branch to the
Network Configuration Window
offline (Controller Link only).
Switches between working offline
and online with the relay PLC
using the device type setting in
the computer.
Used to change the device type
settings of the relay PLC on the
computer. The Change Dialog Box
PLC is displayed.
Sets the CX-Integrator IP address
table. (Only when the relay PLC is
set for Ethernet communications
and the network address is 1 or
greater.)
Automatically connects to the
relay PLC using the
communications settings of the
PLC (supported for serial
communications only).
After the auto-connection has
been made, the device type
information of the relay PLC that
was connected to will be
uploaded.
Switches the connection to the
selected network to enable
accessing it.
Downloads all component
parameters from the virtual
network on the computer to the
components in the actual network.
Uploads the network configuration
of the Communications Unit
selected in the Online Connection
Information Window, provided that
the network can be displayed and
accessed in the Workspace
Window.
Compares the virtual network on
the computer to the network
configuration of the actual
networks (without component
parameters). The target PLC must
be online and accessible.
Description
All networks
Ethernet only
Network
Offline
Online
type
OK
OK
OK
OK
OK
No
OK
No
OK
No
OK
OK
OK
No
OK
OK
OK
No
No
OK
No
OK
No
OK
No
OK
Advertisement
Table of Contents
