Window Descriptions; Starting Methods; Main Window - Omron CX-INTEGRATOR - V2.3 REV 02-2009 Operation Manual

1-5

Window Descriptions

1-5-1

Starting Methods

1-5 Window Descriptions
1-5-1 Starting Methods
The CX-Integrator can be started with any of the following three methods.
1) When using the CX-Programmer Ver. 6.0 or higher, select Tools
2) When using the CX-Programmer that was installed from the CX-One, right-click a
Note: If the Communication Unit is a Serial Communications Board/Unit, a Start Special
3) Select CX-Integrator from the Start Menu.
1-5-2

Main Window

One of the following windows will appear when the CX-Integrator is started.
Offline Window
Workspace Window
Note: The Component List Window and Output Window are not displayed by default. They can
Online Window
Workspace Window
Online Connection
Information Window
1-34
Settings.
Communication Unit in the CX-Programmer's I/O table display and select Start
Special Application from the pop-up menu.
Application Dialog Box will be displayed. Select CX-Integrator in the dialog box to start
the CX-Integrator.
be displayed using the View
Network Configuration Window
−
Windows Menu.
−
Network
Network Configuration Window