Omron CX-INTEGRATOR - V2.3 REV 02-2009 Operation Manual page 317

6-14 Monitoring Devices
6-14-2 Monitoring Devices
Slaves
Devices can be monitored if the parameters of the devices are specified in EDS files
to allow monitoring.
Some OMRON Slaves provide detailed monitoring windows. Refer to the manual for
the specific Slave for details.
MULTIPLE I/O TERMINALs
The monitor window of the DRT1-COM makes it possible to monitor the status and
configuration.
The configuration indicates the connected I/O Units. I/O Units with errors will be
indicated in red.
Fiber Amplifier Communications Units
With the E3X-DRT21 Fiber Amplifier Communications Unit, the following window
makes it possible to monitor the status of connected sensors.
Smart Slaves: Digital I/O Units
Unit status and maintenance information can be monitored in the Smart Slave
Monitoring Window.
Smart Slaves: Analog I/O Units
Unit status and maintenance information can be monitored in the Smart Slave
Monitoring Window.
E5ZN Temperature Controller DeviceNet Communications Unit
Unit status and the status of the connected Temperature Controller can be monitored.
6-68