Omron CX-INTEGRATOR - V2.3 REV 02-2009 Operation Manual page 50

1-4 PLC Connecting Cables
1-4-2 Connecting CJ-series CJ2 CPU Units, CP-series PLCs and NSJ-series Controllers
Using Commercially Available USB Cable
CP-series PLCs
The peripheral USB port (conforming to USB 1.1, B connector) is a dedicated port for
connecting Support Software, such as the CX-One (e.g., CX-Programmer).
NSJ-series Controllers
Commercially
available USB
cable
The USB port (SLAVE, conforming to USB 1.1, B connector) is a dedicated port for
connecting Support Software, such as the CX-One (e.g., CX-Designer and
CX-Programmer).
Items Required for USB Connection
Operating system
Support Software
USB driver
USB cable
1-22
Personal computer
CX-One
USB port
NSJ-series
Controller
(bottom)
Windows 2000, XP, or Vista
CX-One (e.g., CX-Designer and CX-Programmer)
Included with above Support Software.
USB 1.1(or 2.0) cable (A connector-B connector), 5 m max.
USB
connector
(SLAVE)