Compoway/F System Configuration; Overview - Omron CX-INTEGRATOR - V2.3 REV 02-2009 Operation Manual

8-1

CompoWay/F System Configuration

8-1-1

Overview

8-1 CompoWay/F System Configuration
8-1-1 Overview
The CompoWay/F communications configuration (including slave parameters) can be
uploaded using any one of the following three system configurations.
CompoWay/F Slaves that are
1) CompoWay/F Slaves
connected to a
CS/CJ-series PLC (CPU
Unit or Serial
Communication Board/Unit)
or serial port C on the
Controller Section of an
NSJ-series NSJ Controller
2) CompoWay/F Slaves
directly connected to a
computer (CX-Integrator)
3) CompoWay/F Slaves
directly connected to a
computer (CX-Integrator) by
a USB cable
8-2
uploaded
Computer (CX-Integrator)
Communications configuration
Computer (CX-Integrator)
Relay PLC (and target PLC)
CS/CJ-series PLC
Network
connection or
serial connection
(Toolbus or host link)
Upload
• Relay PLC model: CompoWay/F
• Network type: CompoWay/F
RS-232C Cable
RS-232C to RS-485
Serial connection
Serial Converter (K3SC Series)
(CompoWay/F)
RS-485
CompoWay/F
Upload
Computer (CX-Integrator)
• Relay PLC model: CompoWay/F
• Network type: CompoWay/F
USB Cable
Serial connection
(CompoWay/F)
RS-485
Upload
CompoWay/F
USB to RS-485
Serial Converter (K3SC Series)
CompoWay/F