Table of Contents
Advertisement
4-3
Manually Setting Data Links
4-3-4
Creating Data Link Tables Offline
Note
Size modifications and offsets can be set in the Area Specify Dialog Box that is
displayed by double-clicking on the data link configuration icon (oval for send area
Area Specify Dialog Box (Send Area)
Area Specify Dialog Box (Receive Area)
Note: With SYSMAC LINK, the send size can be set, but the receive size and the reception
• Send Area
Can be set.
4-20
or rectangular for receive area
Specify send size.
Specify send size.
Offset cannot be changed.
offset cannot. Therefore, the Area Specify Dialog Boxes are as shown in the following
example diagrams.
).
Offset cannot be changed.
• Receive Area
Cannot be set.
Advertisement
Table of Contents
