Table of Contents
Advertisement
3-1 Routing Table Overview
3-1-6 Operating Procedures Prior to Routing Table Transfer
Network Configuration Procedures
Creating the FINS Local Routing Tables Online
Start the Routing Table Component. (Start the PLC routing table.)
Right-click the Communications Unit or Port in the Online Connection Information Window select Start Routing Table from the
popup menu, or select Tools - Start Routing Table from the CX-Integrator's menu bar.
Select the type of routing table. (Select FINS local.)
Create the FINS local routing tables (in the PLC routing tables).
Create the local network table.
Create the relay network table.
Set the gateway counter. (CS/CJ-series CPU Units must be unit version 3.0 or later.)
Click the SIOU Tab when the PLC routing tables are displayed, right-click the local PLC's icon, and select Set Gateway
Counter from the menu.]
Check the routing tables for errors.
Select Options – Check Routing Table for errors from the PLC routing table menu.
Save the created routing tables.
Select File – Save Local Routing Table File from the PLC routing table menu.
Connect online with the PLC directly connected to the CX-Integrator.
Select Network – Auto Online or Network – Work Online from the CX-Integrator's menu bar.
Start the Routing Table Component. (Start the PLC routing table.)
Read the saved routing tables.
Transfer the routing tables to the PLC (from the computer to the directly connected PLC).
Select Options – Transfer to PLC from the PLC routing table menu.
Update the display in the Online Connection Information Window.
In the Online Connection Information Window, select View – Update of Online Information Window.
3-8
Select Tools – Start Routing Table from the CX-Integrator's menu bar, and select Start Routing Table,
Transferring to a PLC with a direct serial connection
Select FINS Local from the Network Settings Dialog Box.
or right-click the Communications Unit in the Online Connection Information Window.
Select File – Open Local Routing Table File from the PLC routing table menu.
Transferring to a node in the network through the directly
Select the destination network and node.
In the Connecting PLC Change Dialog Box, select the Communications
Unit that connects to the network and the node address.
connected PLC.
Advertisement
Table of Contents
