Omron CX-INTEGRATOR - V2.3 REV 02-2009 Operation Manual page 69

Workspace Window
The Workspace Window lists components and networks.
Component Tab Page
The Component Tab Page lists the components displayed in the Network
Configuration Window.
Workspace
Window
Network Tab Page
The Network Tab Page lists the networks displayed in one Network Configuration
Window.
Workspace Window
The icon to the left of the network that is currently connected and can be accessed will
be either
be accessed at any one time.) To enable accessing a network, right-click on it and
select Connect. The actual communications configuration can then be uploaded by
right-clicking the Communications Unit/port and selecting Transfer
To compare the actual communications configuration with that on the CX-Integrator,
right-click the Communications Unit/port and select Compare.
Note: The Workspace Window corresponds 1:1 to the Network Configuration Window.
If the Network Configuration Window is closed, double-click on a network in the
Workspace Window, and the communications configuration of that network will be
displayed in the Network Configuration Window.
Note Accessible Status for Networks
The following status is possible for a network displayed in the Workspace Window.
Project name
Project name
or With the CX-Integrator, only one Communications Unit/port can
1-5 Window Descriptions
1-5-2 Main Window
Device type
List of components displayed in
Network Configuration Window
Component model
Component name
List of networks displayed in
Network Configuration Window
Network address (3 digits, − for
no address)
Network type
Network name
−
Network to PC.
1-41