Omron CX-INTEGRATOR - V2.3 REV 02-2009 Operation Manual page 389

10-1 Controller Link Network Diagnostic Tool
10-1-3 Diagnosing Node Settings
Node Settings Diagnosis Example
• The settings for each node are displayed in a table.
• The results of diagnosing the integrity of the overall network are displayed at the
bottom. The results of diagnosis are displayed in three levels, as described in the
following table.
• Details will be displayed if the displayed result is double-clicked.
10-12
Level
Indicates problems in the overall integrity of the network.
Locations causing errors are displayed in red.
Error
Example: The data link mode is set to both user-set links and automatically
set links in the nodes for which the data link startup switch is ON.
Indicates settings that may be appropriate for some applications but which
have a high possibility of being errors (setting mistakes or unset items).
Warning
Locations causing warnings are displayed in yellow.
Example: There are no nodes with the data link startup switch set to ON.
Indicates information on items that may be appropriate for some applications.
Information
Example: The Routing Table Enable Bit is ON for C-series PLCs.
Meaning