Ping Test; Overview; Procedure - Omron CX-INTEGRATOR - V2.3 REV 02-2009 Operation Manual

5-2

Ping Test

5-2-1

Overview

5-2 Ping Test
5-2-1 Overview
The connection status of a target PLC can be checked by executing a ping test from a
PLC node connected on an Ethernet network. In the example shown here, PLC1 is
serially connected and a ping test is executed to check whether PLC3 is connected to
the Ethernet network.
Computer (CX-Integrator)
Example:
5-2-2

Procedure

1. After PLC1 is serially connected by an automatic online connection, right-click the
2. After connecting to Ethernet, right-click the Ethernet Unit in the Online Connection
Information Window and select Ethernet tool - Ping test.
5-4
PING
Toolbus
CJ-series CJ-series PLC1
IP address: 192.168.200.104
Network address: 10
Node address: 104
Ethernet Unit and select Connect.
Ethernet
HUB
PING Test 192.168.200.185
CJ-series PLC2 CS-series PLC3
IP address: 192.168.200.105 IP address: 192.168.200.185
Network address: 10 Network address: 1
Node address: 105 Node address: 185