Table of Contents
Advertisement
2-1
Basic Procedures
Reading Saved Parameters and Downloading Them Online to DeviceNet,
CompoNet, or CompoWay/F Components
All of the component parameters on a network can be downloaded to the actual
components from a previously saved project file (.cin) after the network has been
installed. Parameters can also be downloaded for individual components.
Overall Procedure
Connect online to the relay PLC (= target PLC).
Transfer the local network table to the relay
Connect to a Communications Unit/port to enable
2-8
Start the CX-Integrator.
Read project file.
Create the local network table.
PLC via the serial connection.
accessing it.
Download parameters to the network or
to individual components.
−
Select File
Open from the menu bar.
Select Tools - Start Routing Table from the
menu bar.
Create the local network table and select
−
Option
Transfer to PLC.
Right-click the desired network in the Online
Connection Information Window and select
Connect from the pop-up menu.
−
Select Network
Transfer [PC to Network] or
−
Component
Download from the menu bar.
Required when there
is more than one
Network
Communications Unit
in the relay PLC
(= target PLC).
Advertisement
Table of Contents
