Omron CX-INTEGRATOR - V2.3 REV 02-2009 Operation Manual page 280

3. Set the area, start word, and the number of words for the block.
The number of words to be displayed in a block by the CX-Integrator is set in the
Words field. For the CS1W-DRM21(-V1) or CJ1W-DRM21, the maximum number
of words that can be allocated to one block is 500. For the C200HW-DRM21-V1
and CVM1-DRM21-V1, the maximum number of words that can be allocated to
one block is 100.
The ranges that can be set are shown below.
• CS1W-DRM21(-V1) or CJ1W-DRM21
PLC model
CS Series or
CJ Series
Banks 0 to 12 of the EM area can be used.
• C200HW-DRM21-V1
PLC model
C200HS
C200HE-CPU11
C200HX/C200HG/
C200HE(-Z) other than
the above
• CVM1-DRM21-V1
PLC model
CV500,CVM1-CPU01
CV Series and CVM1
other than the above
Note •Words refers to the number of words in the block displayed on the CX-Integrator. This
value is not downloaded to the master.
• If the occupied area of the block is less than 100 words when uploaded, Words will be
set to 100 and displayed as such.
4. Click the OK Button. The memory block will be changed by clicking on OK.
If a device has already been allocated, it will be allocated to a new memory block.
If an area-over error occurs, however, the allocation of the device will be canceled.
Reallocate the device, if necessary.
6-8-2 Changing the First Address of Output/Input Block
Data area
CIO Area
DM Area
Work Area
HR Area
EM Area
Data area
IR/SR Area
HR Area
LR Area
DM Area
IR/SR Area
HR Area
LR Area
DM Area
IR/SR Area
HR Area
LR Area
DM Area
Data area
IR/SR Area
CPU Bus Link Area
DM Area
IR/SR Area
CPU Bus Link Area
DM Area
6-8 Manual I/O Allocations
Range
0000 to 32767
DM 0000 to DM 8191
WR 000 to WR 511
HR 000 to HR 511
EM 00000 to EM 32767
Range
000 to 511
HR 00 to HR 99
LR 00 to LR 63
DM 0000 to DM 5999
000 to 511
HR 00 to HR 99
LR 00 to LR 63
DM 0000 to DM 4095
000 to 511
HR 00 to HR 99
LR 00 to LR 63
DM 0000 to DM 5999
Range
0000 to 2555
G 000 to G 511
DM 0000 to DM 8191
0000 to 2555
G 000 to G 511
DM 00000 to DM 24575
6-31