Cleaning The Peeler Unit - Epson TM-P60II Technical Reference Manual

Cleaning the Peeler Unit

After the peeler is used for a prolonged period of time, the glue from the labels accumulates on the roller or the
peeler holder of the peeler unit. If you leave the roller or the peeler holder in such a condition, the glue may stick
to issued labels, or a paper jam may occur. To prevent malfunctions and maintain good print quality, clean them
regularly (generally every 20,000 labels).
Do not use any alcohol based solvents for cleaning. Such solvents may enter the roller shaft and
cause a malfunction of the peeler.
1
Turn off the printer, and open the roll paper cover and the peeler cover.
2
Remove the glue with a wasted label.
3
Close the covers.
Label
Chapter 5 Handling
5
81