Key Operation Method With Remote Digital Operator Connected - Omron MX2 Series User Manual

3-1-3

Key Operation Method with Remote Digital Operator Connected

This section describes the operation method when the optional Digital Operator (Model: 3G3AX-OP01)
is connected.
Transition of Parameter Display
The following figure shows how to operate the optional Digital Operator (Model: 3G3AX-OP01).
Monitor Mode d
Function Mode F
Parameter display
Extended Function Mode A
Parameter display
Extended Function
Mode b
Extended Function
Mode C
Extended Function
Mode H
Extended Function
Mode P
Extended Function
Mode U
Extended Function
*2
Mode d
Multi-function Compact Inverter 3G3MX2-EV2 User's Manual (I666-E1)
In parameter display mode
*1
: Moves to the parameter display
In parameter
display mode
In parameter display mode
Stores the data.
In data display mode (F001 to F003)
Changes are entered immediately, so the value does not blink even if it is changed.
: Returns to the parameter display after storing the value in the EEPROM.
: Returns to the parameter display without storing the value in the EEPROM.
In data display mode
When data is changed, all digits will blink.
While blinking, the changes are not entered yet.
Returns to d001
3 Operation and Test Run
Data display
d001: Output Frequency Monitor
Use the Increment key/Decrement key to
increase/decrease the parameter number.
When you press the Increment key at the end,
it will return to the beginning in the same mode.
: Moves to the next mode
Data display
F001: Output Frequency Setting
Data display
A001: Frequency Reference Selection
: Returns to the parameter display after entering and storing the changes.
: Returns to the parameter display after canceling the changes.
In the parameter display or data display
mode, pressing the Increment key and
the Decrement key simultaneously
enables quick change of the value.
For details, refer to Individual Input
Mode for Parameters (Direct
Specification/Selection) on page 3-14.
*1.In monitor mode d, data cannot be changed.
*2.After extended function mode U, the display
returns to monitor mode d.
3
3 - 13