Omron MX2 Series User Manual page 573

Precautions for Correct Use
Operation Stop Command
• Provide a separate emergency stop switch because the STOP Key on the Operator is valid only
when function settings are performed.
• The motor may start suddenly if voltage is accidentally applied to a control input terminal in a signal
check when the power supply is ON. Ensure safety when you perform a signal check.
Maintenance and Inspection
• Generally speaking, inverters contain components and will operate properly only when each component
operates normally. Some of the electrical components require maintenance depending on application
conditions.Periodic inspection and replacement are necessary to ensure proper long-term operation of
Inverters.
• When a cooling fan reaches the end of its service life, replace it.
Product Disposal
• Comply with the local ordinance and regulations when disposing of the product.
Dispose of in accordance with WEEE Directive
Multi-function Compact Inverter 3G3MX2-EV2 User's Manual (I666-E1)
11 Maintenance and Inspection
11
12 - 5