Frequency Arrival Signal (Fa2 To Fa5) - Omron MX2 Series User Manual

7 Other Functions
Output frequency
FW input (Forward)
RUN output
RUN LED
7-8-9

Frequency Arrival Signal (FA2 to FA5)

The inverter outputs the frequency arrival signal when the output frequency reaches the set level.
Allocate the Multi-function Output 11/12 Selection (C021/C022) or Multi-function Relay Output (AL1,
AL2) Function Selection (C026) to 02 (FA2: Set frequency exceeded signal), 06 (FA3: Set frequency
only signal), 24 (FA4: Set frequency exceeded signal 2) or 25 (FA5: Set frequency only signal 2).
The hysteresis of the signals FA2 (02) and FA4 (24) is calculated as follows.
ON
OFF
The hysteresis of the signals FA3 (06) and FA4 (25) during acceleration is calculated as follows.
ON
OFF
The hysteresis of these signals during deceleration is calculated as follows.
ON
OFF
Parameter
No.
C042/C045
C043/C046
C021, C022
C026
7 - 84
−
: (Set frequency) (1% of maximum frequency) [Hz]
−
: (Set frequency) (2% of maximum frequency) [Hz]
−
: (Set frequency) (1% of maximum frequency) [Hz]
: (Set frequency) + (2% of maximum frequency) [Hz]
: (Set frequency) + (1% of maximum frequency) [Hz]
−
: (Set frequency) (2% of maximum frequency) [Hz]
Function name
Arrival Frequency During
Acceleration 1/Arrival Fre-
quency During Accelera-
tion 2
Arrival Frequency During
Deceleration 1/Arrival Fre-
quency During Decelera-
tion 2
Multi-function Output
11/12 Selection
Multi-function Relay Out-
put (AL1, AL2) Function
Selection
Multi-function Compact Inverter 3G3MX2-EV2 User's Manual (I666-E1)
Lit
Data
0.00
Not output arrival signal during acceleration
0.01 to 590.00
Output arrival signal during acceleration
0.00
Not output arrival signal during deceleration
0.01 to 590.00
Output arrival signal during deceleration
02: FA2 (Set frequency exceeded signal)
06: FA3 (Set-frequency only signal)
24: FA4 (Set frequency exceeded signal 2)
25: FA5 (Set-frequency only signal 2)
7
Default
Unit
data
0.00 Hz
0.00 Hz
− −