Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 613

COPIER (Service mode for printer) > COUNTER (Counter mode) > LIFE
C4-SP-RL 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Supplement/Memo
M-FD-RL 1
M-SP-RL 1
DF-PU-RL 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Supplement/Memo
Cst4 Sepn Roll: Life VL/No. of days left
To display the life value and the number of days left of the Cassette 4 Separation Roller. The 3rd
and 4th columns may be hidden depending on the country.
1st column: Operation Life Value
2nd column: Number of Days Left
3rd column: Life Value
4th column: Replacement Life Value
- When checking Life VL/No. of days left of the part
- At parts replacement
To change the Replacement Life Value: Select the item, enter the value, and then press OK key.
To reset Operation Life Value/Number of Days Left/Life Value: Select the item, and then press
Clear key.
- Be sure to reset Operation Life Value/Number of Days Left/Life Value after replacing the part.
- Operation Life Value/Number of Days Left/Life Value can also be reset by clearing the parts
counter.
1st column: 0 to 999 (%)
2nd column: 0 to 999 (days)
3rd column: 0 to 999 (%)
4th column: 50 to 999 (%)
Operation Life Value: Wear level value relative to Replacement Life Value (%)
Operation Life Value = Life Value/Replacement Life Value x 100Number of Days Left: Expected
number of days until the part reaches its end of life Replacement Life Value: Target replacement
life value
For R&D
For R&D
Pickup Roller (DADF): Life VL/days left
To display the life value and the number of days left of the Pickup Roller (DADF).The 3rd and 4th
columns may be hidden depending on the country.
1st column: Operation Life Value
2nd column: Number of Days Left
3rd column: Life Value
4th column: Replacement Life Value
- When checking Life VL/No. of days left of the part
- At parts replacement
To change the Replacement Life Value: Select the item, enter the value, and then press OK key.
To reset Operation Life Value/Number of Days Left/Life Value: Select the item, and then press
Clear key.
- Be sure to reset Operation Life Value/Number of Days Left/Life Value after replacing the part.
- Operation Life Value/Number of Days Left/Life Value can also be reset by clearing the parts
counter.
1st column: 0 to 999 (%)
2nd column: 0 to 999 (days)
3rd column: 0 to 999 (%)
4th column: 50 to 999 (%)
Operation Life Value: Wear level value relative to Replacement Life Value (%)Operation Life Value
= Life Value/Replacement Life Valuex104
Number of Days Left: Expected number of days until the part reaches its end of life
Replacement Life Value: Target re
602
8. Service Mode