Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 341

E732-0001-04
Detection Description
Remedy
E732-0010-00
Detection Description
Remedy
E732-0020-00
Detection Description
Remedy
E732-0021-00
Detection Description
Remedy
E732-0022-00
Detection Description
Remedy
E732-0023-04
Detection Description
Remedy
Communication error
DDI-S communication error.
[Related parts] R1.00
- Harness between the READER ADF UNIT (J6, J5) and the Main Controller PCB (J4001, 4002)
- READER ADF UNIT
- Main Controller PCB
[Remedy] Check/replace the related parts. After performing the remedy, check that the copy image
is output normally.
Communication error
A signal to start image transfer could not be detected at scanning although the specified period of
time (120 sec) has passed.
[Related parts] R1.00
- Harness between the READER ADF UNIT (J6, J5) and the Main Controller PCB (J4001, 4002)
- READER ADF UNIT
- Main Controller PCB
[Remedy] Check/replace the related parts. After performing the remedy, check that the copy image
is output normally.
Communication error
A communication error of the Main Controller PCB was detected.
[Related parts] R1.00
- Harness between the READER ADF UNIT (J6, J5) and the Main Controller PCB (J4001, 4002)
- READER ADF UNIT
- Main Controller PCB
[Remedy] Check/replace the related parts. After performing the remedy, check that the copy image
is output normally.
Communication error
A communication error between the Reader Controller PCB and the Main Controller PCB was
detected.
[Related parts] R1.00
- Harness between the READER ADF UNIT (J6, J5) and the Main Controller PCB (J4001, 4002)
- READER ADF UNIT
- Main Controller PCB
[Remedy] Check/replace the related parts. After performing the remedy, check that the copy image
is output normally.
Communication error
A communication error between the Reader Controller PCB and the Main Controller PCB was
detected.
[Related parts] R1.00
- Harness between the READER ADF UNIT (J6, J5) and the Main Controller PCB (J4001, 4002)
- READER ADF UNIT
- Main Controller PCB
[Remedy] Check/replace the related parts. After performing the remedy, check that the copy image
is output normally.
Communication error
DDI-S communication error (SPRDY-S detection error)
[Related parts] R1.00
- Harness between the READER ADF UNIT (J6, J5) and the Main Controller PCB (J4001, 4002)
- READER ADF UNIT
- Main Controller PCB
[Remedy] Check/replace the related parts. After performing the remedy, check that the copy image
is output normally.
330
7. Error/Jam/Alarm