Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 407

■ Procedure for Setting Password
1. Set "1" or "2" in the following service mode.
• COPIER > OPTION > FNC-SW > PSWD-SW
<Setting range>
0: No password [Default]
1: Service technician
2: System administrator + Service technician
CAUTION:
• This setting is enabled without restarting the host machine.
• After setting the password, the following screen will be displayed by accessing service mode.
• Therefore, when the PSWD-SW is set to "2" (system administrator + service technician), enter the system administrator
password ([System Manager ID] and [System Manager PIN] in [Settings/Registrations] > [Management Settings] >
[User Management] > [System Manager Information Settings]), and then press the [OK] button.
2. Follow the following procedure to check that you can login to service mode.
1. When setting PSWD-SW to "1" (system administrator) or "2" (ServiceMode_070Backup) in step 1, the system
administrator password entry screen will be displayed, so enter the system administrator ID in [Sys Manager ID ] (1)
and system administrator password in [Password] (2), and then press the [OK] button.
2. When setting PSWD-SW to "2" (system administrator + service technician) in step 1, the service technician password
entry screen will be displayed after step 2. Enter the service technician password in [Password] (1), and then press the
[OK] button.
CAUTION:
• The service technician password is the password set in COPIER > OPTION > FNC-SW > SM-PSWD.
• If you forget the password for service technician, disable the password function using the Service Support Tool (SST).
Check that you can access service mode and finish the work.
(1)
396
8. Service Mode
(1)
(2)