Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 586

COPIER (Service mode for printer) > OPTION (Specification setting mode) > PM-PRE-M
FX-REP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
C1-REP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
C2-REP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
C3-REP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
C4-REP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
DF-REP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Display/hide Fix Ass'y prepare warning
To switch between display/hide the preparation warning on the Control Panel Status Bar.
In the case of displaying the warning when consumables/consumable parts are not automatically
delivered
Enter the setting value, and then press OK key.
0 to 1
0: Hide, 1: Display
The value differs according to the location.
Display/hide CST1 Roller prepare warning
To switch between display/hide the preparation warning on the Control Panel Status Bar.
In the case of displaying the warning when consumables/consumable parts are not automatically
delivered
Enter the setting value, and then press OK key.
0 to 1
0: Hide, 1: Display
The value differs according to the location.
Display/hide CST2 Roller prepare warning
To switch between display/hide the preparation warning on the Control Panel Status Bar.
In the case of displaying the warning when consumables/consumable parts are not automatically
delivered
Enter the setting value, and then press OK key.
0 to 1
0: Hide, 1: Display
The value differs according to the location.
Display/hide CST3 Roller prepare warning
To switch between display/hide the preparation warning on the Control Panel Status Bar.
In the case of displaying the warning when consumables/consumable parts are not automatically
delivered
Enter the setting value, and then press OK key.
0 to 1
0: Hide, 1: Display
The value differs according to the location.
Display/hide CST4 Roller prepare warning
To switch between display/hide the preparation warning on the Control Panel Status Bar.
In the case of displaying the warning when consumables/consumable parts are not automatically
delivered
Enter the setting value, and then press OK key.
0 to 1
0: Hide, 1: Display
The value differs according to the location.
Display/hide Roller (DADF) prep warning
To switch between display/hide the preparation warning on the Control Panel Status Bar.
In the case of displaying the warning when consumables/consumable parts are not automatically
delivered
Enter the setting value, and then press OK key.
0 to 1
0: Hide, 1: Display
The value differs according to the location.
575
8. Service Mode