Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 309

E355-0002-00
Detection Description
Remedy
E355-0003-00
Detection Description
Remedy
E355-0004-00
Detection Description
Remedy
E412-0005-04
Detection Description
Remedy
E412-0006-04
Detection Description
Remedy
E423-0001-04
Detection Description
Remedy
E503-0062-02
Detection Description
Remedy
E530-8001-02
Detection Description
Remedy
E531-8001-02
Detection Description
Remedy
System error
System error
Contact to the sales company.
System error
System error
Contact to the sales company.
System error
System error
Contact to the sales company.
Fan error
Stop of fan was detected after rotation signal for the ADF Cooling Fan was transmitted.
[Related parts] R1.00
- ADF Cooling Fan
- Main Controller PCB
[Remedy] Check/replace the related parts.
Fan error
Rotation of fan was detected after the stop signal for the ADF Cooling Fan was transmitted.
[Related parts] R1.00
- ADF Cooling Fan
- Main Controller PCB
[Remedy] Check/replace the related parts.
ADF error
An access error to SDRAM for controlling ADF that is installed on the Main Controller PCB was
detected.
Check/replace the Main Controller PCB
Internal communication error
CAN-CPU detected an internal communication error.
[Related parts]
- Finisher Controller PCB
- Harness between the DC Controller PCB and the Finisher Controller PCB
- DC Controller PCB
[Remedy] Check/replace the related harness/cable, connector and parts.
Jogger failure
A change of the Jogger HP Sensor cannot be detected after the start of jogger control.
[Related parts]
- Jogger Unit
- Finisher Controller PCB
- Harness between the Finisher Controller PCB and the DC Controller PCB
- DC Controller PCB
[Remedy] Check/replace the related harness/cable, connector and parts.
Staple Ready error
The Staple Unit does not turn to the "Ready" state.
[Related parts]
- Jogger Unit
- Finisher Controller PCB
- Harness between the Finisher Controller PCB and the DC Controller PCB
- DC Controller PCB
[Remedy] Check/replace the related harness/cable, connector and parts.
298
7. Error/Jam/Alarm