Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 467

COPIER (Service mode for printer) > ADJUST (Adjustment mode) > CCD
OFST3CL0 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
OFST3CL1 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
OFST3CL2 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
OFST3CL3 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
OFST3CL4 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Adj CIS-ch0 offset: back,clr mode,300dpi
To adjust the offset value (black level) of the Scanner Unit (Back) on channel 0 in color mode with
300 dpi.
The value is updated by executing CL-AGC.
- When replacing the SATA Flash PCB
- When replacing the Scanner Unit (Back)
Enter the setting value, and then press OK key.
0 to 255
216
COPIER> FUNCTION> CCD> CL-AGC
Adj CIS-ch1 offset: back,clr mode,300dpi
To adjust the offset value (black level) of the Scanner Unit (Back) on channel 1 in color mode with
300 dpi.
The value is updated by executing CL-AGC.
- When replacing the SATA Flash PCB
- When replacing the Scanner Unit (Back)
Enter the setting value, and then press OK key.
0 to 255
216
COPIER> FUNCTION> CCD> CL-AGC
Adj CIS-ch2 offset: back,clr mode,300dpi
To adjust the offset value (black level) of the Scanner Unit (Back) on channel 2 in color mode with
300 dpi.
The value is updated by executing CL-AGC.
- When replacing the SATA Flash PCB
- When replacing the Scanner Unit (Back)
Enter the setting value, and then press OK key.
0 to 255
216
COPIER> FUNCTION> CCD> CL-AGC
Adj CIS-ch3 offset: back,clr mode,300dpi
To adjust the offset value (black level) of the Scanner Unit (Back) on channel 3 in color mode with
300 dpi.
The value is updated by executing CL-AGC.
- When replacing the SATA Flash PCB
- When replacing the Scanner Unit (Back)
Enter the setting value, and then press OK key.
0 to 255
216
COPIER> FUNCTION> CCD> CL-AGC
Adj CIS-ch4 offset: back,clr mode,300dpi
To adjust the offset value (black level) of the Scanner Unit (Back) on channel 4 in color mode with
300 dpi.
The value is updated by executing CL-AGC.
- When replacing the SATA Flash PCB
- When replacing the Scanner Unit (Back)
Enter the setting value, and then press OK key.
0 to 255
216
COPIER> FUNCTION> CCD> CL-AGC
456
8. Service Mode