Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 487

COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > INSTALL
RMS-RGKY 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Additional Functions
Mode
Supplement/Memo
■ CCD
COPIER (Service mode for printer) > FUNCTION (Operation / inspection mode) > CCD
DF-WLVL1 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
DF-WLVL2 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Related Service Mode
DF-LNR 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
Setting the Device Registration Key
By setting this item in advance, the device registration key input screen can be skipped when
selecting "Counter/Device Information > Monitoring Service".
To reduce the number of UGW connection steps by entering the Device Registration Key for pre-
installation.
Enter the setting value, and then press OK key.
Dealer Tenant has a different Device Registration Key.
If nothing is entered, the Device Registration Key entry screen is displayed.
Input character : 0 to 9
Number of input character : 8 or 16 digit number
Counter/Device Information > Monitoring Service
Device Registration Key : 8 or 16 digit number
White level adj in book mode: color
To adjust the white level for copyboard scanning automatically by setting the paper which is usually
used by the user on the Copyboard Glass.
- When replacing the Copyboard Glass
- When replacing the Scanner Unit (Front)
- When replacing the SATA Flash PCB
- When clearing the Reader-related RAM data
1) Set a paper on the Copyboard Glass.
2) Select the item, and then press OK key.
Be sure to execute DF-WLVL2 in a row.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> CCD> DF-WLVL2
White level adj in DADF mode: color
To adjust the white level for DADF scanning automatically by setting the paper which is usually
used by the user on the DADF.
- When replacing the Copyboard Glass
- When replacing the Scanner Unit (Front)
- When replacing the SATA Flash PCB
- When clearing the Reader-related RAM data
1) Set paper on the DADF.
2) Select the item, and then press OK key.
Be sure to execute this item after DF-WLVL1.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> FUNCTION> CCD> DF-WLVL1
Deriving of DADF front/back linearity
To derive the front/back side linearity in DADF mode based on the scanning data which has been
backed up at factory.
When clearing the Reader-related RAM data/replacing the SATA Flash PCB
1) Enter the value of the reader's service label.
COPIER> ADJUST> CCD> DFCH-R2, DFCH-G2, DFCH-B2, DFCH-K2, DFCH-R10, DFCH-G10,
DFCH-B10, DFCH-K10, DFCH2R2, DFCH2G2, DFCH2B2, DFCH2K2, DFCH2R10, DFCH2G10,
DFCH2B10, DFCH2K10
2) Select the item, and then press OK key.
During operation: ACTIVE, When operation finished normally: OK!
COPIER> ADJUST> CCD> DFCH-R2/G2/B2/K2/R10/G10/B10/K10, DFCH2R2, DFCH2G2,
DFCH2B2, DFCH2K2, DFCH2R10, DFCH2G10, DFCH2B10, DFCH2K10
476
8. Service Mode