Canon imageRUNNER ADVANCE 715iF III Series Service Manual page 588

COPIER (Service mode for printer) > OPTION (Specification setting mode) > PM-EXC-M
DF-REP 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
■ PM-U-DSP
COPIER (Service mode for printer) > OPTION (Specification setting mode) > PM-U-DSP
TR-ROLL 1
FX-REP 1
C1-REP 1
C2-REP 1
C3-REP 1
C4-REP 1
DF-REP 1
■ PM-MSG-D
COPIER (Service mode for printer) > OPTION (Specification setting mode) > PM-MSG-D
TONER-K 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
TR-ROLL 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
FX-REP 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Display/hide Rol (DADF) Replacement mssg
To switch between display/hide the Replacement message on the Control Panel Status Bar.
When a non-technical person will replace the drum unit
Enter the setting value, and then press OK key.
0 to 1
0: Hide, 1: Display
The value differs according to the location.
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
Set days left before Toner(Bk) prep warn
To set the timing (number of days left) at which the preparation warning will be displayed.
When changing the timing (number of days left) at which the preparation warning will be displayed
Enter the setting value, and then press OK key.
Change the setting in accordance with the instruction of the sales company HQ.
0 to 365
The value differs according to the location.
Set dys lft bef Sec Trnsfr-Rol prep wrn
To set the timing (number of days left) at which the preparation warning will be displayed.
When changing the timing (number of days left) at which the preparation warning will be displayed
Enter the setting value, and then press OK key.
Change the setting in accordance with the instruction of the sales company HQ.
0 to 365
The value differs according to the location.
Set days left before Fix Ass'y prep warn
To set the timing (number of days left) at which the preparation warning will be displayed.
When changing the timing (number of days left) at which the preparation warning will be displayed
Enter the setting value, and then press OK key.
Change the setting in accordance with the instruction of the sales company HQ.
0 to 365
The value differs according to the location.
577
8. Service Mode