Table of Contents
Advertisement
Microprocessor Installation Tool A
To install a microprocessor and heat sink, complete the following steps.
Heat sink
Heat sink key
Heat sink
filler
Step 1.
Remove the cover (see
Step 2.
If you are not installing a new microprocessor and a new heat sink, remove the thermal grease from
the heat sink and microprocessor; then, apply new thermal grease before installation (see
grease" on page
Step 3.
Remove the heat-sink filler, if one is present.
Step 4.
Open the microprocessor socket release levers and retainer.
Lenovo Flex System x440 Compute NodeInstallation and Service Guide
936
Installation tool
Microprocessor
Cover
Microprocessor Installation Tool B
"Removing the compute node cover" on page
940).
Installation tool
Microprocessor
888).
"Thermal
Advertisement
Table of Contents
Troubleshooting
