Lenovo Flex System x440 Compute Node Installation And Service Manual page 310

No
Alert Category
Warning - Temperature
SNMP Trap ID
12
CIM Information
Prefix: PLAT ID: 0520
User Response
Complete the following steps until the problem is solved:
1. Check the Chassis Management Module or Flex System Manager event log for any fan- or
cooling-related issues.
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are
in place and correctly installed.
3. Make sure that the room temperature is within operating specifications.
• 80070101-2c0402ff : Sensor Mezz Exp 4 temp has transitioned from normal to non-critical state.
The temperature of the I/O expansion adapter in I/O expansion connector 4 has exceeded its specified
threshold.
May also be shown as 800701012c0402ff or 0x800701012c0402ff
Severity
Warning
Serviceable
Yes
Automatically notify support
No
Alert Category
Warning - Temperature
SNMP Trap ID
12
CIM Information
Prefix: PLAT ID: 0520
User Response
Complete the following steps until the problem is solved:
1. Check the Chassis Management Module or Flex System Manager event log for any fan- or
cooling-related issues.
2. Make sure that the airflow at the front and rear of the chassis is not obstructed and that fillers are
in place and correctly installed.
3. Make sure that the room temperature is within operating specifications.
• 80070101-2c04ffff : Sensor Mezz Exp 4 temp has transitioned from normal to non-critical state.
The temperature of the I/O expansion adapter in I/O expansion connector 4 has exceeded its specified
threshold.
May also be shown as 800701012c04ffff or 0x800701012c04ffff
Severity
Lenovo Flex System x440 Compute NodeInstallation and Service Guide
300