Installing The Bezel; Removing The Cmos Battery - Lenovo Flex System x440 Compute Node Installation And Service Manual

Bezel
Step 1. Use a flat-blade screwdriver to carefully pull the bezel from the compute node.
Step 2. Lift the bezel from the compute node.
If you are instructed to return the bezel, follow all packaging instructions, and use any packaging materials
for shipping that are supplied to you.

Installing the bezel

Use this information to install the bezel.
Before you install the bezel, read
To install the bezel, complete the following steps.
Bezel
Step 1. Position the bezel on the front of the compute node.
Step 2. Press the bezel securely against the chassis.
Note: Make sure that the bezel is pressed flat against the chassis around the power button, to
maintain access to the power button.

Removing the CMOS battery

Use this information to remove the CMOS battery.
Lenovo Flex System x440 Compute NodeInstallation and Service Guide
886
"Safety" on page iii and "Installation guidelines" on page 879.