Lenovo Flex System x440 Compute Node Installation And Service Manual page 339

– have the LOM model compute node
– have the corresponding fabric connector installed
– Information regarding the fabric connectors:
– LOM 1 utilizes the fabric connector in location 1.
– LOM 2 utilizes the fabric connector in location 2.
– I/O expansion adaptor in I/O expansion slot 1 and the fabric connector in slot 1 utilize the same
connector and only one of the two can be installed at a time.
– I/O expansion adaptor in I/O expansion slot 3 and the fabric connector in slot 2 utilize the same
connector and only one of the two can be installed at a time.
• 8008010f-2101ffff : Device [LogicalDeviceElementName] has been added.
The physical presence jumper has been installed in the compute node.
May also be shown as 8008010f2101ffff or 0x8008010f2101ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0536
User Response
Information only; no action is required.
• 8008011b-1f07ffff : Device [LogicalDeviceElementName] has been added.
The fabric connector for LAN On Motherboard (LOM) in location 1 is present.
May also be shown as 8008011b1f07ffff or 0x8008011b1f07ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0536
User Response
.
Chapter 6 Troubleshooting
329