Lenovo Flex System x440 Compute Node Installation And Service Manual page 335

No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix: PLAT ID: 0530
User Response
This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of
the Info Center for the appropriate user response.
Related links
– Finding the UEFI diagnostic code
• 80070617-2c01ffff : Sensor Mezz Exp 1 Fault has transitioned to non-recoverable.
A problem has been detected in the I/O expansion adapter in I/O expansion connector 1. The adapter is
unable to initialize.
May also be shown as 800706172c01ffff or 0x800706172c01ffff
Severity
Error
Serviceable
Yes
Automatically notify support
No
Alert Category
Critical - Other
SNMP Trap ID
50
CIM Information
Prefix: PLAT ID: 0530
User Response
Complete the following steps:
1. Remove the I/O expansion adapter in I/O expansion connector 1.
2. Try to power on the chassis.
– If the chassis successfully powers on, complete the following steps:
a. Check the
compatible with the chassis.
b. Inspect the previously installed components for physical damage.
– If the chassis does not successfully power on or if this is not the first occurrence of this
problem, replace the I/O expansion adapter.
• 80070617-2c02ffff : Sensor Mezz Exp 2 Fault has transitioned to non-recoverable.
A problem was detected in the I/O expansion adapter in I/O expansion connector 2. The adapter is unable
to initialize.
ServerProven website to make sure that recently installed components are
.
Chapter 6 Troubleshooting
325