Lenovo Flex System x440 Compute Node Installation And Service Manual page 59

Table 2. IMM2 actions (continued)
Tab Selection
IMM Management IMM Properties
Users
Network
IMM Management Security
Description
The IMM Properties page provides access to various properties, status, and
settings for your IMM2:
• The Firmware tab provides a link to the Server Firmware section of Server
Management.
• The IMM Date and Time Settings tab allows you to view and configure
date and time settings for the IMM2.
• The Serial Port tab configures the IMM2 serial port settings. These
settings include the serial port baud rate used by the serial port
redirection function and the key sequence to switch between the serial
redirection and command-line interface (CLI) modes.
The Users page allows you to configure the IMM2 login profiles and global
login settings, and to view users that are currently logged in to the IMM2.
Global login settings include enabling Lightweight Directory Access
Protocol (LDAP) compute node authentication, setting the web inactivity
timeout, and customizing the account security settings.
Note: Some things cannot be done (e.g. cannot create users) if the CMM is
managing IPMI/SNMPv3 user account.
The Network Protocol Properties page provides access to networking
properties, status, and settings for your IMM2:
• The Ethernet tab manages how the IMM2 communicates using Ethernet.
• The SNMP tab configures the SNMPv1 and SNMPv3 agents.
• The DNS tab displays the DNS servers that the IMM2 interacts with.
• The DDNS tab enables or disables and configures Dynamic DNS for the
IMM2.
• The SMTP tab configures SMTP compute node information used for
alerts sent via email.
• The LDAP tab configures user authentication for use with one or more
LDAP compute nodes.
• The Telnet tab manages Telnet access to the IMM2.
• The USB tab controls the USB interface used for in-band communication
between the compute node and the IMM2. These settings do not affect
the USB remote control functions (keyboard, mouse, and mass storage).
• The Port Assignments tab allows you to change the port numbers used
by some services on the IMM2.
The IMM Security page provides access to security properties, status, and
settings for your IMM2:
• The HTTPS Server tab allows you to enable or disable the HTTPS
compute node and manage its certificates.
• The CIM Over HTTPS tab allows you to enable or disable CIM over
HTTPS and manage its certificates.
• The LDAP Client tab allows you to enable or disable LDAP security and
manage its certificates.
• The SSH Server tab allows you to enable or disable the SSH compute
node and manage its certificates.
.
Chapter 4 Accessing the IMM2
49