Lenovo Flex System x440 Compute Node Installation And Service Manual page 100

The start-end address ranges in the restricted area of the memory.
Recoverable
No
Severity
Warning
Serviceable
No
Automatically notify support
No
User Response
Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related links
–
Lenovo Support website
–
Latest level of DSA
• 201-819-003 : Standalone Memory Test Aborted
The start-end address ranges in the restricted area of the memory.
Recoverable
No
Severity
Warning
Serviceable
No
Automatically notify support
No
User Response
Complete the following steps:
1. Perform the actions mentioned one at a time and try the test after each action.
2. If the problem remains, contact your technical-service representative.
3. Turn off the system and disconnect it from power. Wait for 45 seconds. Reseat DIMM(s).
Reconnect it to power.
4. Make sure that DSA and BIOS/uEFI are at the latest level.
Related links
– Lenovo Support website
–
Latest level of DSA
• 201-820-000 : Standalone Memory Test Aborted
Memory Upper limit is less than 16 Mbytes.
Recoverable
No
Lenovo Flex System x440 Compute NodeInstallation and Service Guide
90