Lenovo Flex System x440 Compute Node Installation And Service Manual page 263

Prefix: IMM ID: 0116
User Response
Information only; no action is required.
• 40000075-00000000 : The measured power value exceeded the power cap value.
The measured power value has exceeded the power cap value.
May also be shown as 4000007500000000 or 0x4000007500000000
Severity
Warning
Serviceable
No
Automatically notify support
No
Alert Category
Warning - Power
SNMP Trap ID
164
CIM Information
Prefix: IMM ID: 0117
User Response
– Make sure IMM firmware is at the latest level.
– Raise the system power cap value or adjust the system workload to be less than the currently
applied power cap.
Related links
– Updating firmware and device drivers
– IBM Flex System and IBM PureFlex Firmware Updates Best Practices
• 40000076-00000000 : The new minimum power cap value exceeded the power cap value.
The new minimum power cap value has exceeded the power cap value.
May also be shown as 4000007600000000 or 0x4000007600000000
Severity
Warning
Serviceable
No
Automatically notify support
No
Alert Category
Warning - Power
SNMP Trap ID
164
CIM Information
Prefix: IMM ID: 0118
User Response
User may need to adjust the power cap value to be greater or equal to the minimum power cap.
.
Chapter 6 Troubleshooting
253