Installing A Microprocessor And Heat Sink - Lenovo Flex System x440 Compute Node Installation And Service Manual

• If using Installation Tool B, gently twist the handle of the installation tool clockwise until it
locks in the "H" or "L" position, depending on the size of microprocessor, and then lift the
microprocessor out of the socket.
If you are instructed to return the microprocessor and heat sink, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Installing a microprocessor and heat sink

Use this information to install a microprocessor and heat sink.
Note: This procedure should be performed only by trained service technicians.
The architecture of the Intel E5-46xx CPU and DMI switching of microprocessor sockets 1 and 2 allow for the
processors to be populated as shown in the following figures.
Lenovo Flex System x440 Compute NodeInstallation and Service Guide
932