Lenovo Flex System x440 Compute Node Installation And Service Manual page 338

Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0537
User Response
Informational message.
On a LOM model compute node, if you are utilizing LOM and it is not working ensure you have the
necessary fabric connector installed.
– To utilize the LOM:
– have the LOM model compute node
– have the corresponding fabric connector installed
– Information regarding the fabric connectors:
– LOM 1 utilizes the fabric connector in location 1.
– LOM 2 utilizes the fabric connector in location 2.
– I/O expansion adaptor in I/O expansion slot 1 and the fabric connector in slot 1 utilize the same
connector and only one of the two can be installed at a time.
– I/O expansion adaptor in I/O expansion slot 3 and the fabric connector in slot 2 utilize the same
connector and only one of the two can be installed at a time.
• 8008001b-1f08ffff : Device Periscope 2 has been removed from unit
[PhysicalPackageElementName].
The fabric connector for LAN On Motherboard (LOM) in location 2 is not present.
May also be shown as 8008001b1f08ffff or 0x8008001b1f08ffff
Severity
Info
Serviceable
No
Automatically notify support
No
Alert Category
System - Other
SNMP Trap ID
CIM Information
Prefix: PLAT ID: 0537
User Response
Informational message.
On a LOM model compute node, if you are utilizing LOM and it is not working ensure you have the
necessary fabric connector installed.
– To utilize the LOM:
Lenovo Flex System x440 Compute NodeInstallation and Service Guide
328