Lenovo Flex System x440 Compute Node Installation And Service Manual page 944

Before you install a microprocessor and heat sink, complete the following steps:
1. Read "Safety" on page iii
2. If the compute node is installed in a Flex System chassis, remove it (see
from a chassis" on page 880
3. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the
bezel pointing toward you.
Lenovo Flex System x440 Compute NodeInstallation and Service Guide
934
and "Installation guidelines" on page
for instructions).
879.
"Removing a compute node